WELLSYSTEM RELAX PLUS, Operating Instructions Manual

Page: 35 / 52

Operation
01/2022 1020143-00 Operating instructions – 35/52
Operating
button Setting/
display
Remarks
Altering the
nozzle carriage speed,
e. g. from
to
Press the speed button and hold for
approx. 1 s. The display will flash.
Press the plus or minus buttons to set
the value that you want.
Factory setting: SP.15
Minimum and maximum speeds:
05 to 30 in increments of 1
Altering the back
length,
e.g. from
to
Press the back length button and hold
down for approx. 1 s Display flashes.
Press the plus or minus buttons to set
up the value that you want.
Factory setting: 55
Steps: 45, 55, 65
Altering the massage area and the type of massage
NOTE:
The zone or point massage selection only functions when
the nozzles are moving from the head end to the foot end.
If you have missed the right moment:

First select whole body massage again.

Wait until the nozzles reach the desired position while
moving from the head end.

Press zone or point massage.
– Press the new massage area button.
– Press the new massage type button.
Massage area default factory setting: Whole body
Massage type default factory setting: Parallel stroke