Wellsaw 1316S-SA, Operating & Maintenance Manual

Page: 34 / 40

34
Blade Brush Assembly
1 100165-007 Shoulder bolt, 3/8 x 3/8
2 100004-018 Cap Screw, HH 5/16-18 x 1
3 100025-002 Lockwasher, 5/16
4 150160-002 Door Latch Stud
5 150360 Spring
6 150364 Belt Tension Arm
7 100069-003 Snap Ring
8 100166-450 V’ Belt
9 150369 Blade Brush Arm
10 100004-015 Cap Screw, HH 5/16-18 x 3/4
11 100042-003 Thumb Screw, 1/4-20 x 2
12 100024-002 Wing Nut, 1/4-20
13 100029-002 Flat Washer 1/2 USS (2 required)
14 100030-005 Flat Washer 3/8 SAE
15 100165-015 Shoulder Bolt 3/8 x 1-3/4
16 100097-001 Washer
17 150361 Pulley, belt idler
18 100416-001 Bearing
19 B-043 Axle
20 100019-005 Hex Jam Nut 1/2-20
21 100133-004 Blade Brush
22 100030-007 Flat Washer 1/2 USS (2 required)
23 150257 Brush Housing
24 100404-001 Bearing (2 required)
25 150126 Brush Arbor
26 100167-003 Small Pulley w/ set screw
27 150272 BLADE BRUSH ASSEMBLY
(includes items 20-26)
Note: Adjust thumb screw (11) so that the brush makes
light contact with the blade. This avoids dulling the
blade and prevents premature brush wear.