Wells WVO4HF, Owner'S Manual, Page: 20 / 42

18
CONVECTION OVEN CLEANING INSTRUCTIONS
PRECAUTIONS Turn oven power switch to FAN
Allow oven to cool
FREQUENCY Y As Noted
TOOLS Mild Detergent, Soft Cloth or Sponge
Plastic Scouring Pad
Spray Bottle
Commercial Oven Cleaner/Degreaser
DAILY
1. Turn oven power switch to FAN
UHPRYHUDFNVDQGWDNHWREDFN
VLQN
2. Let oven cool to 200°F. If oven is cooler than 200°F, raise
temperature to no more than 200°F.
3. Mix oven cleaner/degreaser per manufacturer’s directions. Spray
RYHQFOHDQHUGHJUHDVHUVROXWLRQRQWRVRLOHGVXUIDFHVWKHQFORVH
RYHQGRRUDQGOHWVWDQGIRUPLQ
4. Open door slowly to allow steam to escape and allow oven to cool
completely.
:LSHRYHQVXUIDFHVZLWKDVRIWFORWKULQVHFORWKDVQHFHVVDU\
6. Re-spray any remaining soiled areas and scrub with a plastic
scouring pad.
7. Rinse all surfaces with a clean soft damp cloth.
:DVKULQVHDQGVDQLWL]HRYHQUDFNVDQGUHSODFHLQRYHQ
9. Wipe exterior surfaces with a clean cloth dampened with clean
water and a non-abrasive cleanser. Rinse by wiping with a clean
cloth dampened with clean water.
HEAVY SOIL RECOVERY—As Needed
1. Turn oven power switch to FAN
UHPRYHUDFNVDQGWDNHWREDFN
VLQN
2. Let oven cool to 200°F. If oven is cooler than 200°F, raise
temperature to no more that 200°F.
6SUD\2YHQ&OHDQHU'HJUHDVHUIXOOVWUHQJWKRQWRVRLOHGVXUIDFHV
WKHQFORVH RYHQGRRUDQGOHWVWDQGIRUPLQ
4. Open door slowly to allow steam to escape and allow oven to cool
completely.
:LSHRYHQVXUIDFHVZLWKDVRIWFORWKULQVHFORWKDVQHFHVVDU\
6. Re-spray any remaining soiled areas and scrub with a plastic
scouring pad.
7. Rinse all surfaces with a clean soft damp cloth.
:DVKULQVHDQGVDQLWL]HRYHQUDFNVDQGUHSODFHLQRYHQ
CLEANING INSTRUCTIONS
AUTION:
UT HAZARD
Use due care when cleaning
near fan. Blades are sharp.
AUTION:
LECTRIC SHOCK
AZARD
DO NOT splash or pour water
onto control panel or wiring.
CAUTION:
EAT AND
MOKE HAZARD
Keep the ventilator fan
running during any “hot
surface” cleaning operation
to avoid a build-up of heat
DQGRUVPRNH
IMPORTANT: Avoid Fire
Suppression System
discharge!
Keep the ventilator fan
running during any “hot
surface” cleaning operation
WRDYRLGPHOWLQJDIXVLEOHOLQN
and causing a discharge of
WKH¿UHVXSSUHVVLRQPHGLD
IMPORTANT:
Always rub / wipe in the
direction of the polish lines
or grain of the metal.
DANGER
ELECTRIC SHOCK HAZARD
DO NOT SPRAY WATER ON OR AROUND
ELECTRICAL EQUIPMENT
DO NOT WASH FLOOR NEAR ELECTRICAL
EQUIPMENT WITH WATER SPRAY
M
506 2M-304964 Owners Manual WVOC-4
H