DAILY CLEANING INSTRUCTIONS
PREPARATIONS:
Turn control knob(s) to OFF. Unplug the warmer.
Allow warmer to cool before proceeding.
Remove any insets, pans and/or adapter tops
Drain or remove water from well if used for wet
operation.
FREQUENCY:
Minimum - daily.
TOOLS:
Mild Detergent
Solution: 10 Parts Warm Water to 4 Parts
Vinegar
Plastic Scouring Pad
Clean Cloth or Sponge
1. Wipe entire unit down using a clean cloth or sponge and mild
detergent.
2. Use a plastic scouring pad to remove any hardened food
particles or mineral deposits.
IMPORTANT: DO NOT
use steel wool for cleaning.
3. Rinse warmer thoroughly with a vinegar and water solution to
neutralize all detergent cleanser residue.
4. Inspect warmer tank for damage. Damage to the outer body
may allow grease and water to leak into insulation and heating
element, causing a potential fire and/or electric shock hazard.
Contact your Authorized Wells Service Agency to inspect the
warmer if you suspect water or grease contamination.
5. Add proper amount of warm water. Reconnect warmer to
electric power. Turn control knob(s) ON and check for proper
operation.
CAUTION
:
SHOCk HAzARD
Do NOT splash or pour water
into or over any control panel
or wiring.
CAUTION:
SHOCk HAzARD
Disconnect warmer from
electric power before cleaning
CAUTION:
BURN HAzARD
Allow warmer to cool
completely before cleaning.
CAUTION:
SHOCk HAzARD
DO NOT
submerge warmer
in water.
CLEANING INSTRUCTIONS
6
001 p/n 2M-303305 Owners Manual CT W
armers / Thermostat Control
001 p/n 2M-303305 Owners Manual CT W
armers / Thermostat Control
