Wellslok Mounting System
2M-302353 Basic Installation and Extension Kits
BASIC USE
rectangular warmer shown
Wellslok
Wellsloks
from underneath
Wellsloks
Wellslok extension kit
sealant
gasket
warmer
countertop
mounting screw
mounting clip
KIT
QUANTITY OF
MOUNTING CLIPS
QUANTITY OF
SCREWS
22593
10
10
22592
6
6
Rectangular extension kits [number 22593] come with hardware
to secure a single well up to 12 inches (305 mm) by 20 inches (508
mm) in size. For multiple-well models, additional kits will be required.
If your unit is a 4- or 5-well model, then you will need 3 kits for
proper installation. On 2- or 3-well models, you will need 2 kits for
proper installation. The clips will need to be attached under the
countertop and be positioned equally around the unit to assure
proper seating. Once all are in place tighten screws until they are
flush against the underside of the counter and the unit is secured
in place. On some materials, you may wish to place something
in between the tip of the screw and the countertop to prevent
marring the countertop material.
HSW, HT, HW, MDW, MOD, and SS series of round or rectangular,
top-mounted, built-in warmers come equipped with the Wellslok
mounting system. After getting the warmer positioned correctly
into the cutout with the appropriate gasket(s) and sealant applied,
as described in the installation instructions for the unit, access the
underside and turn each Wellslok tab outward with a screwdriver
as shown on the right to secure the warmer to the counter. On
countertops thicker than 16 GA steel, Wellslok extension kit[s]
will be needed. These kits can accommodate countertops up to
1.5 inches (38 mm) thick.
Wellslok extension kits can only be
used with UL listed warmers approved for installation in wood
countertops. When installing in custom countertops, please
follow the manufacture’s “suggested” recommendations or
guidelines for installation of heated equipment in their counter
material”.
Round extension kits [number 22592] come with hardware
to secure one well. The clips will need to be attached under the
countertop and be positioned equally around the unit to assure
proper seating. Once all are in place tighten screws until they are
flush against the underside of the counter and the unit is secured
in place. On some materials, you may wish to place something
in between the tip of the screw and the countertop to prevent
marring the countertop material.
RECTANGULAR EXTENSION KITS
BASIC USE
ROUND EXTENSION KITS
WELLS BLOOMFIELD, LLC
•
www.wellsbloom ield.com
265 Hobson St
•
S
mithville
,
Tennessee
37166
Telephone 888 356 5362
•
Fax 314 781 5445
Printed in the U.S.A. • 2M-Z20755 • Rev
B
•
05.2018
The owner is responsible for proper installation as
described above. Please refer to the owner’s manual
for information regarding installation or use.
