Wells H-336 Operation Manual Download Page 5

This appliance is intended for use in commercial establishments 
only. 
 
This appliance is intended to prepare food for human consumption.  
No other use is recommended or authorized by the manufacturer or its 
agents.

 

 
Operators of this appliance must be familiar with the appliance use, 
limitations and associated restrictions.  Operating instructions must be 
read and understood by all persons using or installing this appliance.

 

 
Cleanliness of this appliance is essential to good sanitation.  Read and 
follow all included cleaning instructions and schedules to ensure the 
safety of the food product. 
 
Hotplates with coil-type heating elements must be operated with drip 
pan and element support properly installed. 
 
Disconnect the hotplate from electrical power before performing any 
maintenance or servicing. 
 
DO NOT splash or pour water over or into interior of hotplate, 
control panel or wiring. 
 
The technical content of this manual, including any wiring diagrams, 
schematics, parts breakdown illustrations and/or adjustment 
procedures, is intended for use by qualified technical personnel. 
 
Any procedure which requires the use of tools must be performed by a 
qualified technician. 
 
This manual is considered to be a permanent part of the appliance.  
This manual and all supplied instructions, diagrams, schematics, parts 
breakdown illustrations, notices and labels must remain with the 
appliance if it is sold or moved to another location. 
 
This appliance is made in the USA.  Unless otherwise noted, this 
appliance has American sizes on all hardware. 

This appliance conforms to NSF Standard 4 for sanitation only if 
installed in accordance with the supplied 

Installation Instructions

 
This appliance is Underwriters Laboratory recognized (

).  

Since this appliance is only a single component of a complete 
installation, the finished installation of this 

R

  unit requires 

additional evaluations to Underwriters Laboratory standards. 

 
This unit is designed to be installed in a metal counter only. 

 

 
WARNING: 
Electric 
Shock hazard 

 

All servicing requiring 
access to non-insulated 
electrical components 
must be performed by a 
factory authorized 
technician. 
DO NOT open any 
access panel which 
requires the use of tools.  
Failure to follow this 
warning can result in 
severe electrical shock.

 

 
CAUTION: 
Risk of 
Damage 

 

DO NOT connect and/or 
energize this appliance 
until all installation 
instructions are read and 
followed.  Damage to the 
appliance will result if 
these instructions are not 
followed. 

PRECAUTIONS AND GENERAL INFORMATION 

AGENCY APPROVAL INFORMATION 

STD 4 

Summary of Contents for H-336













Reviews: