wellnissage 519.2222.10, Assembly, User And Maintenance Instructions, Page: 13 / 76

Technische. Änderungen vorbehalten!
12 
Copyright HRB3662
A Assembly conditions for a Wellnissage assembly team
If you need help assembling your cabin and choose to employ a Wellnissage assembly team, we will carry
out the following services for you:
Assembly means putting together (installation) of the individual parts supplied. It does not include treating
them with a wood protection agent, the delivery and assembly of accessories and accessory parts. Electrical
connections are not included in the assembly service.
The items to be assembled must be located at the installation site/location/base area. Transport of the article
or the individual parts over a distance greater than 5 m or to another level is not included in the assembly
price quoted. The substrate must be stable, horizontal and level.
In the event of doubt, reference should be made
to DIN 18202 ‘Level tolerances in building construction’,
tab. 3, row 3, with a maximum height difference at the furthest points of approx. 10 to 11 mm.
All preparatory work must have been carried out in accordance with the technical regulations before
assembly begins. The substrates/floors/foundations constructed or selected by you must be suitable for the
assembly.
Tools
You should have the following tools to hand before beginning assembly.
Spring tape
Elektric
Spirit level measure Drill screwdriver Hammer Screwdriver
Mitre saw/
hand disk saw Universal cutter
Spanner Allen key
Abbreviations / Symbols
Abb.
Figure
cm - Centimetre
mm - Millimetre
ca. - approximately/approx.
RW - Rear wall
- Supply air
- Outgoing air
Not included in delivery!
-
- Two people are required for assembly for safety reasons