16
ENG EU
Preparation
Controller
Insert batteries into the controller.
1.
Open the battery compartment cover by sliding it in the
direction of the arrow.
2.
Insert two batteries into the controller. Make sure the
orientation (+ and-) is, and insert the end of each battery first.
3.
Close the battery compartment cover by
sliding it in the direction of the arrow.
Notes for batteries
•
If it becomes difficult to control the unit with the controller or if the
indicators on the controller become faint, replace the batteries.
•
When replacing the batteries, install two new LR03 (AAA) alkaline
batteries at the same time. Manganese batteries are not long-lasting.
BEFORE USE
4.
Insert the power plug correctly into an electrical outlet.
Warning
•
Failure to observe this precaution may result in electric shock,
malfunctioning or fire due to heat generation.
5.
Set the main power switch to the “I” (ON) position.
Note
The power will turn off automatically if no operation is performed
within 120 minutes after turning on the power.