Installation and Maintence
The head shower installation holes and size
Installation preparation: before the
product leave the factory, they have
been fixed according to actual use
state. You should open the back
cover first. Make the first screw
loose, took the card cover, then
picked up the back cover.
• Twist screw interface into the pipes, tight.
• Measure screw end to wall distance. Ensure that distance is form 15mm to
18 mm, exit the screw, and cut the part no need.
• Screw the tape on water stops, and screw down the water supply tube
• Open the water supply valve, flush piping system
128
17,5
39,5
80
G 1/2”
