background image

 

-  - 

10

The power socket should be in such as place, where is reachable conveniently. 

Please use a socket that’s installed according to the requirements. The wine 

cooler should be connected with 115V/60Hz AC power. 

Warning! 

 

In any case, please do not connect the wine cooler to the electronic energy 

saving power plug or the converter (such as: solar energy equipment, ship’s 

electric grid) that convert DC into 115V AC. 

Turn on the wine cooler and set up temperature 

The screen is shown as the following picture: 

 

+

: Press this button once and the temperature increase 34°F (1°C). 

-

: Press this button once and the temperature decrease 34°F (1°C). 

: Temperature display. 

 LIGHT

: Lighting button for LED lamp; it controls the on/off of lamp. 

 POWER

: On/off button used to turn on/off all load. 

Press 

LIGHT 

and

 POWER

 together for 2 seconds and you can convert 

between Fahrenheit temperature and Celsius temperature. 
 

Notice!

 

z

 

The default temperature of UL-JC130GE is 50°F (10°C), and the 
temperature after power failure will be the temperature set before the 
power failure. 

z

 

The default temperature of UL-LC130GE is 41°F

 

(5°C), and the 

temperature after power failure will be the temperature set before the 
power failure. 

z

 

To elongate the service life of compressor, please wait for at least 5 

minutes before the wine cooler is restarted after power failure. 

z

 

Failure display 

z

 

If there is failure on the sensor, the screen may display failure code, such 

as: E and F. When the screen displays the above-mentioned errors, please 

Summary of Contents for WBC142

















Reviews: