5-7
WXSB 200
EN
2.1
Please observe the following guidelines:
General
information
−
Do not put the Solder Bath into operation unless it is in perfect
working order.
−
Keep flammable objects well clear of the solder bath.
−
Do not work on electrically live parts.
−
The solder bath remains hot for some time after it is switched off.
−
Avoid unintentional/accidental operation. Never leave the hot
solder bath unattended.
−
Hot liquid soldering tin and solder spatter can cause burns. Wear
appropriate protective clothing to protect yourself against burns.
−
Protect your eyes. Wear protective goggles.
−
Please note that when using lead based solder, lead emissions
are measurable at temperatures above 500°C.
−
Read and follow the Operating Instructions for the Weller WX,
WXA, WXD supply unit in use.
2.2
Intended use
Use the WXSB 200 Solder Bath only for the purpose stated in the
Operating Instructions and under the conditions described in this
document. Intended use of the WXSB 200 Solder Bath also includes
the requirement that you
−
adhere to these instructions,
−
observe all other accompanying documents,
−
comply with national accident prevention guidelines applicable at
the place of use.
The manufacturer accepts no liability for any damage resulting from
failure to use the device in compliance with these operating
instructions or unauthorised modifications to the device.
3
Included in delivery
−
T0052704399 WXSB 200 Soldering Bath
−
Operating Instructions
4
Device description
4.1
WXSB 200 Solder Bath
The WXSB 200 Solder Bath has been designed for industrial
manufacturing applications. The solder bath is suitable for
connecting to
all WX supply units rated for 200 W. The temperature
of the solder bath can be adjusted infinitely variably from 100°C to
500°C using the connected supply unit. The solder bath is
connected to the power supply (24 V safety extra-low voltage) by a
heat resistant silicone cable.
