Weller WXD 2, Operating Instructions Manual

Page: 105 / 122

WXP 120 5-8
DE
EN
FR
IT
ES
PT
NL
SV
DK
FI
GR
TR
CZ
PL
HU
SK
SL
EE
LV
LT
2.2 Intended use
Use the WXP 120 soldering iron exclusively for the purpose
indicated in the operating instructions of releasing, accommodating
and depositing electronic components under the conditions specified
herein. Intended use of the WXP 120 soldering iron also includes the
requirement that you
−
adhere to these instructions,
−
observe all other accompanying documents,
−
comply with national accident prevention guidelines applicable at
the place of use.
The manufacturer accepts no liability for any damage resulting from
failure to use the device in compliance with these operating
instructions or unauthorised modifications to the device.
3 Included in delivery
WXP 120 (packed) T0052920199:
−
Soldering iron WXP 120, T0052920199
−
XT B chisel tip 2.4 X 0.8 mm T0054470400
−
Operating instructions of WXP 120
Also included in WXP 120 soldering set T0052920299:
− WDH 10 safety rest T0051512199
− Sole plate connector T0058703153
− Operating instructions of WDC 2
4 Device description
4.1 Soldering iron WXP 120
The WXP 120 soldering iron is characterised by fast and precise
achievement of the soldering tip temperature. A highly powerful
120 W heater element provides excellent dynamic performance.
Thanks to its slim-line design and the extremely short distance from
the handle to the tip, this soldering iron can be used for general
purposes from precision soldering to high-temperature soldering.
The WXP 120 is equipped with a usage detector and can be
automatically switched to standby mode or switched off when not in
use. The operating status is indicated by the status indicator LED.
For directions for setting the standby temperature and the switching
times, please refer to the operating instructions of the WX supply
unit in use.
Note The WXP 120 soldering iron by Weller may only be operated
together with Weller WX supply units
.