1144
SSoollddeerriinngg TTiippss
1122.. W
Weelllleerr W
WM
MPP SSoollddeerriinngg IIrroonn
1122..11.. DDeessccrriippttiioonn
Due to its handy design, the Weller WMP micro solder-
ing iron is suitable for work on professional SMD elec-
tronics. The short distance between the soldering tip
and handle, “tip-to-grip” ensures precise handling of
the soldering iron while performing the most detailed of
soldering tasks. A high-quality sensor and heat transfer
technology provides precise temperature control at the
soldering tip. Due to straightforward tip changing and
the extremely fast heat up time, various types of tips
can be used for multiple applications.
Tip grounding is designed into the soldering iron. With
an ESD safe, anti-static handle and cordset, the WMP
satisfies all EOS and ESD requirements.
1122..22.. PPllaacciinngg iinnttoo OOppeerraattiioonn
Place the soldering iron in the tool holder. Remove all
combustible objects away from the soldering iron and
the work area. Insert the connector (4) into the power
supply receptacle and lock it by turning clockwise. Turn
the station power switch “On” and set the required
temperature on the control. Once the tool has reached
the desired temperature, tin the soldering tip with sol-
der.
1122..33.. OOppeerraattiinngg IInnffoorrm
maattiioonn
W
Waarrnniinngg:: OOnnccee lloooosseenneedd,, tthhee hhoott ssoollddeerriinngg ttiipp iiss nnoo
lloonnggeerr sseeccuurreedd.. TThhee GGuuiiddee HHeexx TTooooll aanndd ttiipp m
muusstt bbee
m
maaiinnttaaiinneedd iinn aa hhoorriizzoonnttaall oorr uuppw
waarrdd ppoossiittiioonn ttoo pprree--
vveenntt tthhee lloooossee ttiipp ffrroom
m ffaalllliinngg oouutt ooff tthhee HHeexx TTooooll..
CChhaannggiinngg ssoollddeerriinngg ttiippss
SSttrraaiigghhtt ssoollddeerriinngg ttiippss
– Hold soldering iron horizontally or a slight downward
angle.
– Guide hex tool for changing the tip over the heater
element to the stop on the handle.
– Undo soldering iron tip and remove it from the front.
Ensure that you do not touch the hot soldering tip or the
heating element, as this could result in serious injuries.
CCuurrvveedd ssoollddeerriinngg ttiippss aanndd SSM
MTT ssoollddeerriinngg ttiippss
Use a heat resistant silicone pad to unscrew the solder-
ing tip and to pull it out to the front. Hold the silicone
pad in your hand in such a way that prevents direct
contact with the soldering tip from occurring.
Ensure that you do not touch the hot soldering tip or the
heating element, as this could result in serious injuries.
W
WM
MPP IIrroonn
LTSMT01P
SMT Blade
10,4 mm 0,6 mm
7,1 mm
0.410 in 0.022 in 0.280 in
LTSMT02P
SMT Blade
16,8 mm 0,6 mm
7,1 mm
0.620 in 0.022 in 0.280 in
LTSMT03P
SMT Blade
20,8 mm 0,6 mm
7,1 mm
0.820 in 0.022 in 0.280 in
SSM
MDD SSoollddeerriinngg TTiippss ffoorr W
WPP8800 // W
WSSPP8800
A
C
C
B
A
B
C
A
A
B
C
B
