4-H
4-I
Installation in the vehicle
15
Installation in the vehicle
16
4-1 Installation of Group I and it is for the children whose
weight between 9-18kg.
4-1 Installation of Group I and it is for the children whose
weight between 9-18kg.
4-A
4-B
4-C
4-F
4-D
4-E
4-G
Adjust the baby car seat into the sleeping position (3-C).
Take the Lower Shaft out of the seat, then pull the seat back (4-A).
Install the safety belt through the seat back from the middle of top and
fixed it into the buckle on the car seat (4-B).
Open the Lock-off device and Belt tension part (4-C).
Put the belt through the Lock-off device\Hooks and Belt tension part,
closed the Lock-off device and Belt tension part. Tighten up the belt,
fixed it into the buckle on the car seat (4-D).
The seat will be fixed by two belt in two directions. One belt from the
Lock-off device of the seat and the other from the Hooks for lap belt,
tighten car belt , use Lock-off device to clip it. So it can not move (4-E).
Make sure the axis exactly fit into the groove and you can heard click
sound (4-F).
Put the seat body back to its Lower shaft and lock the shaft safety (4-G).
Pull out a small portion of the Upper metal shaft, let the shoulder belt go
through inside of the Upper metal shaft (4-H), and secure the Upper
metal shaft (4-I).
Please make sure that any lap strap is worn low down, so
that the pelvis is firmly engaged.
