Wellav SMP260, Quick Installation Manual

Page: 6 / 20

6
SMP Encoder & Transcoder Quick Installation Guide
V1.0-N
„
Press MENU button to enter main menu.
„
Select a sub-menu by pressing arrow UP and arrow DOWN button.
„
Press OK button on the selected sub-menu.
z
To change parameter
„
Step 1: Enter main menu by pressing MENU button.
„
Step 2: Scroll sub-menu by pressing arrow UP and arrow DOWN button, and press
OK button to change the selected sub-menu.
„
Step 3: To change parameter settings, press arrow RIGHT and arrow LEFT button
to move the cursor in which change must be made.
„
Press arrow UP button and arrow DOWN to input / select an appropriate setting,
then press OK button to save.
2.2.2 Check Out and Change the Default IP Address
z
Step 1: check out the IP on the LCD screen.
z
Step 2: use the button on the front panel to change the IP, gateway and subnet mask.
The gateway should be the same as the management PC’s. The subnet mask should
be the same as the management PC’s s. The IP and the server’s IP should be in the
same section.
z
Step 3: reboot the device to take effect.
z
Step 4: ping the new IP on PC to check whether the SMP260 can connect to the
management PC.
2.2.3 Configuration through NMS
Accessing the equipment through NMS can be very convenient for remote
configuration of the equipment. Relative to the front panel settings, NMS operation
can provide a more user-friendly man-machine interface, and less limits in space. For
quick installation, NMS operation is highly recommended. In this installation guide,
operation instruction is based on NMS style. For front panel operation, please refer to
product user manual.
z
Install the NMS Tool
„
Unpack the accessory CD, and put it on a PC CD/DVD driver;