802.11n WLAN Gigabit Router User’s Manual
Field Description
Host Name
Enter the host name of your computer. (This is optional and is only
required if your service provider asks you to do so.)
IP Address
The IP of your Router LAN port.
Subnet Mask
Subnet Mask of you LAN. All devices on the network must have the
same subnet mask to communicate on the network.
LAN2
Enable / Disable LAN 2.
LAN2 IP
The IP address of LAN2.
LAN2 Subnet
Mask
Subnet Mask of LAN2.
DHCP Type
To give your LAN Client an IP, you have to enable DHCP server. If not,
manual setting up your client IP is necessary when you want to use the
router as your client’s default gateway.
Start IP Address Specify the DHCP Client start IP address.
End IP Address
Specify the DHCP Client End IP address.
The number of the “End IP” must be greater than “Start IP”, and cannot
be the same as the router’s IP address.
Subnet Mask
Subnet Mask of you LAN (default 255.255.255.0). All devices on the
network must have the same subnet mask to communicate on the
network.
Primary DNS
Server
Specify the Primary DNS Server IP Address.
Secondary DNS
Server
Specify the Secondary DNS Server IP Address.
Default Gateway Specify the Default Gateway IP Address.
Lease Time
Choose the length of the time for the device to recycle and give out the
IP addresses to the devices in your network (default 86400).
Statically
Assigned
Can statically assigned the client MAC and IP address. There are three
IP can assign.
802.1d
Spanning Tree
Enable/Disable 802.1d Spanning Tree.
LLTD Enable/Disable LLTD.
IGMP Proxy
Enable/Disable. IGMP proxy enables the system to issue IGMP host
messages on behalf of hosts that the system discovered through
standard IGMP interfaces. The system acts as a proxy for its hosts.
UPNP Enable/Disable.
(Universal
Plug-and-Play). Network architecture based
on TCP/IP and intended to allow terminals to be networked without the
need for configuration. In the Barricade router, for example, the correct
ports are automatically opened for applications like Net meeting, online
games, etc. You can choose to enable or disable the UPnP Service.
54
Summary of Contents for WRC8500AN
