1.
Charging jack
7. USB port
2.
Aux-in jack 8. Volume Gear
3.
MicroSD slot 9. ON/OFF
4. LED indicator 10. Mode (Switch Bluetooth, USB disk, SD,FM and AUX-IN state)
5. Backward
11. Play/Pause
6. Forward
Bluetooth:
1. Turn the power button to “ON”, The LED light turn blue and twinkle quickly and beep twice.
2. Activate Bluetooth of mobile phone and search for device name “ VIBRANT ” then connect it. The blue
LED light twinkle slowly and and beep third times once connected successful.
3. Play the music from your mobile phone and enjoy.
4. Press Backward or Forward button on the devices or on Mobile phones to select songs you like.
5. Press Play/pause button on the devices or on Mobile phones to play/stop the music
6. Use the “Volume Gear “to adjust volume up and down. Or adjust the mobile phones’ volume.
Playing music from USB disk & MicroSD card:
1.
Turn the Power button to “ON”.
2.
Insert MicroSD card or USB flash disk into slot, the music stored will be played automatically and blue
LED light always keep lighting.
3.
Under playing mode, short press Forward or Backward button to select songs you like, long press to
fast forward or backward the song.
4.
Press PLAY/PAUSE to play or pause.
5.
Please turn the Power button to “OFF” while without use.
Remark: Under Bluetooth playing mode, insert Micro SD or USB will disconnect the Bluetooth and switch
the playing from USB or Micro SD card. You can press the MODE button to switch to Bluetooth mode again.
FM Radio:
1.
Under FM radio state, the audio cable provided treat as antenna. Please Insert the audio cable
to get the best FM signal before using.
2.
Turn the power button to “ON”, press the “MODE” button to switch to FM radio state.
3.
Under playing mode, short press “Play/pause” button to auto search the FM Channel and store
it automatically.
4.
Press LAST or NEXT button to change the stored FM channel.
Colorful LED display and off:
This unit will display 7 color bright pulsating light when music is on. To turn light off, please push the
Play/Pause button for 5 seconds.
AUX-IN:
For other compatible music devices or your MP3/MP4 players, use the supplied audio line cable to
connect from the device’s “Line Out” to the “Aux In” of this devices. Then press the “MODE” button to
switch to AUX-IN state. Enjoy…
When using an external device, all functions will be controlled by the external devise except the
“Play/pause” button.
