surfaces next to the toast slits are very hot.
SAVE THESE INSTRUCTIONS.
Please keep these instructions.
Note: this appliance is intended for household use only.
WARNING: This appliance must be earthed.
Read all instructions.
OPERATION
Place your toaster on a flat, dry, stable surface.
Plug the toaster in, and adjust it to your required toasting time, using the timing control
knob (5)
Place bread or other food suitable for toasting into the slot, then press down the start control
/knob (1). It will remain down until the bread is toasted.
If you wish to stop the toasting process, press the Stop button (4). This will automatically
eject the toast, and Stop the heating elements.
If the bread sticks in the toaster, unplug it, wait for it to cool, and then remove the bread.
NEVER USE METAL UTENSILS TO REMOVE THE BREAD.
After use, wipe away crumbs using a dry cloth.
Always allow at least 1 minute’s cooling time between cycles if toaster is being used more
than once at a time.
Must put in the bread when using the toaster, can not use the toaster without bread.
CLEANING AND CARE INSTRUCTIONS
Note: Should be allowed to cool completely before cleaning.
Unplug from the power outlet (mains).
To remove crumb slide out the crumb tray and discard crumbs. Wipe clean and replace,
never operate the toaster without crumb tray in place.
DO NOT use coarse or abrasive sponges/cloths or steel wool to clean the toaster.
Never spray or apply cleaner directly onto or into the toaster – cleaner should be applied to
a soft cloth.
The outside of the toaster should be wiped with a soft, damp cloth, and polished with a soft,
dry cloth.
•After cleaning, wait a few minutes for the toaster to dry completely before use.
