background image

ADDITIONAL FUNCTIONS OF THE REMOTE CONTROL

 

 

RESTORE FACTORY SETTINGS 

Press the "SET" + "FAN" buttons at the same time for approximately 3 seconds until the entire 
remote screen flashes to restore factory settings. 
 

 

FAST COOLING AND HEATING FUNCTION 

FAST COOLING 

Point the remote at the A/C and press the "F.COOL" button. This will change the mode to 
cooling, temperature to 21 degrees, fan speed to strong and direction to automatic. 
 

FAST HEATING 

Point the remote at the A/C and press the "F.HEAT" button. This will change the mode to 
heating, temperature to 27 degrees, fan speed to strong and direction to automatic. 
 

 

CLOCK FUNCTION 

1. Hold down the "CLOCK" button for approximately 3 seconds until the time on the screen 
starts flashing. 
2. Use the "TEMP+" and "TEMP-" buttons to adjust the time, please note if you hold down the 
button it will scroll faster. 
3. Press the "CLOCK" button to confirm the adjusted time. 
 

 

TIMER FUNCTION 

Please note that the remote must be programmed with your A/C for this function to work. The 
remote must also be turned on which you can determine by whether or not a temperature is 
displayed on the remote screen, if it is not turned on then please press the power button. 
Please note using the TIME ON and TIME OFF button may not work for all A/Cs. 
 
1. Point the remote at the A/C and Press the "TIME ON" or "TIME OFF" button depending on 
your desired function, the remote screen will then display "TIME ONO1" or "TIME OFFO1" 
and your AC should respond by flashing a light or making a beep sound. "01" indicates the AC is 
set to turn on/turn off automatically in 1 hour. 
2. Press the same button again to increase the number of hours. The maximum is 15 hours and if 
you press the same button once more after it shows "TIME ON15" or "TIME OFF15" on the 
screen it will turn off this function. 
 

 

Waste  electrical  and  electronic  equipment  are  a  special  waste  category, 
collection, storage, transport, treatment and recycling are important because they 
can avoid environmental pollution and are harmful to health. Submitting waste 
electrical and electronic equipment to special collection centers makes the waste 
to  be  recycled  properly  and  protecting the environment.  Do  not  forget!  Each 
electric appliance that arrives at the landfill, the field, pollutes the environment! 

 

 

Importer & distributor: 

SC VITACOM ELECTRONICS SRL 
CIF: RO 214527 
Tel. 0264-438401* 

[email protected]

www.vitacom.ro

 

Summary of Contents for RC-AC-HOMY-WL






Reviews: