4 Ports ADSL2/2+ Router
4
2.2 Steps for Connection:
Following are the steps to properly connect your 4 Ports ADSL2/2+ Router:
1. Turn off your computer.
2. Connect the ADSL port of your 4 Ports ADSL2/2+ Router to the wall jack of the ADSL
Line with a RJ-11 cable.
3. Connect the Ethernet cable (RJ-45) from your 4 Ports ADSL2/2+ Router to the Ethernet
Adaptor in your computer.
4. Connect the Power adaptor to the 4 Ports ADSL2/2+ Router and plug the other end into
a Power outlet.
The Power light will lit after turning on the 4 Ports ADSL2/2+ Router.
Auto and self-diagnostic process might turn the LED indicators ON and
OFF during the process.
!
5. Turn on your computer.
6. Refer to the next chapter to setup or configure your system’s Network Adaptor.
