Pairing procedure:
1. Put the Self-Generating Power Button next to the Receiver, and long press the VOLUME button at the
Receiver for 5 seconds.
2. At the same time, continuous press the Self-Generating Power Button for 5 times.
3. A very loud tone can be heard as confirmation on the DOORBELL. The pairing should have done.
2. Short operating range
Reason: There are too many obstacles like walls, metal doors between receiver and button
Solution: Test operating range before installation and change location.
NOTE:
When you turned off the DOORBELL and turning back on again will reset the volume level and
music tone selected previously to default volume level and music tone, but the pairing of between the
BUTTON and DOORBELL will not affected.
Waste electrical and electronic equipment are a special waste category,
collection, storage, transport, treatment and recycling are important
because they can avoid environmental pollution and are harmful to health.
Submitting waste electrical and electronic equipment to special collection
centers makes the waste to be recycled properly and protecting the
environment. Do not forget! Each electric appliance that arrives at the
landfill, the field, pollutes the environment!
Importer & distributor:
SC VITACOM ELECTRONICS
SRL CIF: RO 214527
Tel. 0264-438401*
[email protected], www.vitacom.ro
