RECHARGE INSTRUCTIONS
Firstly, the input of this adaptor is 100~240V, 50/60hz.
The appliance can be used directly connected to the power, or by using his batteries.
Ensure that the adaptor is properly attached to the hair trimmer, then connect the adaptor to the
socket.
Before using for the first time, leave the hair trimmer to charge for at least 12 hours, but do not to
recharge for longer than 48 consecutive hours. To extend battery life it is advisable to recharge it
when power of battery is completely finished.
Adjusting cut level
It has 1pc guide comb, the cutting length is 3mm, 3.5mm, 4mm….15mm, 24 steps.
To select the cutting length by rotating the cutting length controller in the middle of hair trimmer.
Warning: insert or remove guide comb only if appliance is off.
Thinning hair out
To thin hair out, move the button of thinning function to the left side. This function enables you to
reduce hair volume, obtaining a modern, shaggy look without altering the length of hairs.
Usage
1) To obtain best results is better to use the appliance on dry hair, and com hair well before cutting,
make sure that there are no tangles or knots.
2) Hold the appliance in a calm and relaxed manner in order to ensure maximum control of the cut
and a uniform result. Proceed to use shortcuts gradually going around the head.
CLEANING AND MAINTENANCE INSTRUCTION
Always switch off and unplug appliance before cleaning it. Take off the guide comb, and gently
press blade forward to remove it from unit. Use the provided brush to clear from any hairs.
Never immerse the appliance in water. Clean the outside of the hair trimmer with a slightly moist
soft cloth.
After cleaning, lubricate with 2/3 drops lubricating oil. Then put the blade and guide comb back.