USER’S MANUAL - AUTOMATIC VOLTAGE REGULATOR
5
5. Installation of the AVR
Install the AVR in a cool, dry, clean place – away from windows, dust, moisture and
cold to prevent fire or electrical shock, do not expose the AVR to rain or water.
For better performance and longer lifespan, this AVR must be installed on a wall!
a. Install the AVR in a place where the children can’t reach for.
b. Do not install the AVR in or near water.
c. Do not place AVR on an unstable cart, stand or table.
d. Do not place AVR under direct sunlight,excessive humidity.
e. Keep away from fire, heat sources.
f. Keep away from corrosive gas or fluid.
g. Do not place AVR power cord in any area where it may get damaged by heavy objects.
The AVR must be installed on a firm wall, other than other places.!
A. Dimension of Hanging Holes
500VA/1000VA Models
1500VA/2000VA Models
B. Size of Screws
It’s strongly recommended to use the SLEEVE ANCHOR BOLTS instead of the normal screws.
The head of Anchor Bolt / Screw should be within
6mm~9mm
in diameter.
Make sure all the Anchor Bolts/Screws are tightly fastened on the wall!
Make sure the four hanging holes of the AVR are tightly fastened with the Anchor Bolts!
6. Operation of the AVR
A. Connect the Electrical Appliances to the AVR
• Make sure all appliances are turned "OFF", and put the
POWER SWITCH
of AVR to “OFF” position.
• Plug the appliances into the output sockets of the AVR, ensuring that the total starting power does not
exceed the rated maximum power capacity of the AVR.
B. Connect the AVR to Mains Power
•
Plug the
AC INPUT CABLE
into wall mains socket.