background image

USER’S MANUAL 

 

AUTOMATIC VOLTAGE REGULATOR 

Model: AVR-REL-500/1000/1500/2000VA-WL 

 

 

 
Thank you for choosing a 

WELL 

product. Please read carefully the following instructions and keep them within 

reach. 

Please read and save this manual! 

 
Thank you for selecting this smart automatic voltage regulator (AVR). It provides you with a perfect protection for 
connected equipment. 
 
This manual is a guide to install and use the AVR. It includes important safety instructions for operation and 
correct installation of the AVR. Should you have any problems with the AVR, please refer to this manual before 
calling customer service. 
 

 
 

 
TABLE OF CONTENTS 

 

1. 

Important Safety Instructions

 

……………………..….........................................................................………1 

 
2. 

Specifications 

…………………………………………………….................................................................……2 

 

3. Before Installation 

……………………………………....……....................................................................……2 

a. Contents 
b. Visual observation 
 

4. Introduction to the Regulator

…………………………….........................................................................…....3 

a. Front of the Regulator 
b. Rear of the Regulator 
 

5. Operation of the AVR

……………………………………........................................................................………4 

a. Connect the Electrical Appliances to Regulator 
b. Connect Regulator to Electrical Mains 
c. Switch on the regulator 
d. Display of Input Voltage and Output Voltage 
e. LED Operation 
f. Delay Operation 
g. Integrated Automatic Protection Circuit (IAPC) 
h. Temperature Protection  
i. High Output Voltage Protection  
j. Low Output Voltage Protection 
k.Short Circuit Protection 
 

6. Placement

………………………………………………………..................................................................……5 

a. Moving           
b. Environmental 
 

7. Maintenances

 

………………………………………………..........................................................................…6 

 

8. 

Other 

…………………………………………………..……...........................….........................................……6 

 

 

This symbol gives information regarding the points important for user’s own health 
and safety, AVR operation and the safety of your data. 

 

 

This symbol gives information, warnings, and other suggestions.

 

Summary of Contents for AVR-REL-500-WL








Reviews: