Contact us for assistance: (866) 985-7877 | www.wtliving.com
4
aSSEMBLY
1
Choose one of the
rocker Bases
A
and one
“i”
Brace
G
. Align the eyelets of one “
i” Brace
(I) with
the drilled holes in the front leg of one
rocker Base
.
Insert two
Long Bolts
H
through the leg into the
“i”
Brace
eyelets. Secure using two
nuts
K
, but do not
tighten all the way. Repeat steps 1-3 to secure the
second
“i” Brace Bar
to the back leg. Complete the
rocker base by fitting the other
rocker Side
onto the
“i” Braces
and securing with
Long Bolts
and
nuts
,
ensuring that both sides face the same direction.
hardware used:
8x Long Bolts
8x Nuts
2
Locate the eyelet on one side of each
Back
Support
B
. Seat each
Back Support
in the open
tubes of the assembled base, ensuring that the
eyelets face away from each other. Locate the four
holes punched in the sides and back of the fabric
sleeves of the
Fabric Seatback
F
. Slide the sleeves
of the
Fabric Seatback
over the
Back Supports
you
just installed, ensuring that the holes in the fabric
align with the eyelets drilled in the back supports.
Insert two
Short Bolts
J
through the eyelets of the
Frame Brace Bar
C
into the back supports to secure
the frame brace to the seat back.
hardware used:
2x Short Bolts
