3. Install tonearm rest / lock in plinth approx. 50mm (2in). See Fig (3).
Fig (3)
Note:
There is no requirement to apply excessive force to the above set screws. A gentle tighten is sufficient to secure the
components. Over tightening can lead to damaging the plinth.
Suspending the Golf Ball Tonearm
Before embarking on this procedure, we suggest a review of the manual from Fig (4) - (9) is mandatory.
1. Coarse azimuth adjustment if necessary can be achieved by rotating the tonearm within the golf ball. The Head-shell should be
parallel to the small nylon filament points. See Fig (4).
1
2
Fig (4)
1. Head-shell
2. Parallel
Front-on view of the Golf ball tonearm
4
