10
2.5.2.
Thermo operation (ON/OFF BASED ON SET TEMP SETTING)
The system can control your appliance thermostatically when operating in
THERMO
mode.
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
-
+
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
-
+
NOTE: To prevent repeated thermo-cycling of the gas
appliance, changes in temperature are only recorded every
2 minutes.
1.
Starting in OFF mode, press
MODE
until the
LCD-screen displays
THERMO
.
2.
Press
+/-
to set the desired room temperature.
The highest SET temperature is 32°C (99°F), the
lowest SET temperature is 6°C (45°F). The
transmitter
will
measure
the
room
temperature every 2 minutes, automatically
turning
the
appliance
ON
or
OFF
thermostatically, according to the SET
temperature. The flame height can be set by
pressing on
U
P &
DOWN
buttons..
3.
Press
FAN
(only for appliances equipped with a
fan) to modify the ventilator speed (see
chapter 2.5.5. Changing FAN speed). Unless
you change the operating mode, the fan will
keep functioning at this speed.
2.5.3.
Automatic (PROGRAM)
In OFF mode, press
MODE
for 3 seconds
until OFF
THERMO is displayed on the LCD-screen. Push MODE
again (ON or OFF PROGRAM). The following is displayed
on the LCD-screen:
Current period of the day (MORN/DAY/EVE/NITE),
depending on the set program;
ON/OFF
to mark if the appliance is turned on or not;
Room temperature (
TEMP
).
Desired set temperature for this period (
SET
);
FAN LOW/MED/HI
indicates the fan speed.
The appliance will operate automatically depending on
the pre-programmed weekly program and changes in
temperature.
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
-
+
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
-
+
2.5.4.
Adjusting the flame height (UP/DOWN en AUTO)
This setting is possible in the
ON
-mode.
To adjust the flame height of the main burner:
push UP to increase the flame height
push DOWN to decrease the flame height.
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
-
+
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
OFF
MODE
RETURN
ON
RESET
FLAME+
FLAME-
REVIEW
BACK
TIMER
AHEAD
AUTO
MODE
FAN
-
+
