WELDY roofer RW3400, Operating Manual

Page: 13 / 104

13
10. Service and repair
Repairs may only be carried out by local Weldy partners. Usage is limited to the use of original accessories and original
spare parts from Weldy.
For more information, go to www.weldy.com.
11. Warranty
• The guarantee or warranty rights that were agreed upon by the local Weldy partners apply for this device.
• In the case of guarantee or warranty claims, all manufacturing or processing errors shall be repaired or replaced
by the local Weldy partners at their own discretion.
• Other guarantee or warranty claims are excluded within the framework of mandatory law.
• Damages resulting from natural wear, overload, or improper handling are excluded from the warranty.
• Heating elements shall be excluded from warranty obligations or guarantees.
• No guarantee or warranty claims exist for devices which have been converted or changed by the purchaser or for
which non-original Weldy spare parts have been used.
12. Declaration of conformity
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil, Switzerland confirms that this product
fulfils the requirements of the following EU Guidelines in the models that we have made available for purchase.
Guidelines: 2006/42, 2014/30, 2014/35, 2011/65
Harmonized standards: EN 12100, EN 55014-1, EN 55014-2, EN 61000-6-2, EN 61000-3-2,
EN 61000-3-3, EN 61000-3-11 (Z
max
), EN 62233, EN 60335-1, EN 60335-2-45,
EN 50581
Name of the authorized document official: Volker Pohl, Manager Product Conformity
Kaegiswil, 02/01/2017
Bruno von Wyl, CTO Andreas Kathriner, GM
13. Disposal
Never dispose of electrical equipment with household refuse!
Electrical equipment, accessories, and packaging should be subjected to environmentally
friendly recycling.
9. Accessories
Only genuine Weldy spare parts and accessories may be used. Failure to use such spare parts and accessories will
invalidate the warranty and guarantee.
For more information, go to www.weldy.com
8. Frequently asked questions, causes and measures
Poor quality welding result:
• Check the drive speed, the welding temperature, and the air volume.
• Clean the
welding nozzle (3) with a wire brush.
• Welding nozzle (3) set incorrectly (see Setting the welding nozzle).
The required welding nozzle has still not been reached after a maximum of 5 minutes:
• Check the line voltage.
• Reduce the air volume.