background image

7.  Troubleshooting 

 

 

8.  Transporting and storage  

Always store the devices in a dry, ventilated place, out of reach of children and bystanders. Protect the 
device against vibrations and shocks during transport. 

 

9.  Recycling 

The packaging and device materials are suitable for recycling use. Disposal of the packaging and device 
must be done in accordance with local regulations. The packaging materials should be protected against 
children as they are potential source of danger. 

 

10. 

Declaration of conformity 

LVD 2014/35/EU 
EN 60974-1:2012 

 

11. 

Warranty 

The manufacturer of the device provides full warranty service for the power supply unit within 24 months 
from the day device was purchased. An individual warranty card is issued for each device.  
Warranty is valid only if all conditions listed in the instructions manual were fulfilled. If the device was 
used inappropriate or against instructions the warranty becomes invalid. Service centre does not cover 
the postage cost for sending the device for repairs or sending it back after repairs.  
 
DELTA-TECHNIKA SP Z O.O. 
Stanisława Lema 26 
20-446 Lublin 
POLAND 

Summary of Contents for MISTRAL MIG 200











Reviews: