Weldex WDS-1010P, User Manual, Page: 7 / 63

INTRODUCTION
FEATURES
6
GG
MINI SPEED DOME MINI SPEED DOME
Lens
Power
Address Range
Preset
Tour
Pattern
Scan
Privacy Zone
Area Titles
Alarm
Protocol
Communication
Manual Speed
Preset Speed
Proportional Pan
100x(10x Optical, 10x Digital)
1/4 inch lnterline Transfer CCD
240 Position
8(Preset, Tour, Pattem and Scan)
8(Total 960 seconds)
8 including Vector Scan
32 zones (8 groups)
8
0.2 /sec ~ 400 /sec
Max 400 /sec
Yes
4 input(NO/NC), 1 output(NO/NC/COM, 24V 1A open dry contact)
Auto Protocol Recognition (Standard, Pelco-D, Pelco-P etc.)
RS-485 Half duplex. Max 4000 ft (1.2Km)
12~24VDC (12~24AC Optional)
99 ID (255 ID Optional)
The Controller and Mini Speed dome make up the building blocks for any surveillance / security system.
Using a multiple Controller and multiple dome cameras, no place is too large for monitoring and recording.
Extendable and flexible architecture facilitates remote control functions for a variety of external switching
devices such as DVR, Matrix switcher and Dome Camera
Precautions for proper Operation
* Do not install the unit a place subject to direct sunlight, excessive moisture, dust or vibrations
where ventilation is poor.
* Please use the unit in the range of a guarantee temperature and humidity of operation.
* Please set ID of a camera as the same number as the input channel to DVR or Matrix switcher.