WeldCorp MIG 125, Owner'S Operating Manual

Page: 6 / 21

INVERTER MIG 160 DUAL PURPOSE WELDERS
The welding machine is manufactured with advanced inverter technology and is suitable
for MIG/MAG/MOG welding. It is highly reliable, handy, compact and can be supplied with
single-phase voltage from 220V to 240V, 50/60Hz. It allows the MIG welding for copper,
special and nickel-based and high strength steels, the MAG welding for low carbon steels,
stainless steels and the MOG welding for flux cored wires, weldable without the aid of the
gas.
It can automatically manage many functions that allow the good result of the welding. It is
equipped with “HOT START”, “ARC FORCE” and “ANTI STICK” functions. The user interface is
simple to use because consists of two knobs and two displays.
This welding machine is for professional use only and is reserved for the industry.
INSTALLATION
Warning:
Use all precautions required in the safety manual before operating the welder,
reading carefully the risks linked to the welding process. The installation must be made by
trained personnel in compliance to the standard IEC 60974-9 and the current legislation.
To lift the machine you must use the handle positioned on top of the product with the
machine in OFF position and the welding cable disconnected. The input voltage must match
the voltage indicated on the technical plate located on the product. The equipment shall
only be used on a supply system that is a single-phase, three-wire system with an earthed
neutral.
Use the machine on electric system having supply features and power protection that are
compatible with the current required for its use, for more details see the information on the
nameplate affixed to the machine. The machine has an IP21 S protection level.
Page 5
DESCRIPTION OF THE MACHINE
FRONT PANEL
On the front side of the machine are:
1. Control Panel
2. Euro connector
3. Socket positive ‘+’
4. Cable GAS / NO GAS
5. Socket negative ‘-’
REAR PANEL
On the back panel of the machine are:
1. Power Switch ON / OFF
2. Power supply cable
3. MIG gas attachment