Page 10
OPERATION- Feeding the welding wire
6) Press the trigger switch to engage the
MIG welding wire feed and wait until the
wire is automatically fed through the
wire hose, ensuring the feeding tube is
straight and not coiled, as this may cause
a wire blockage.
If the welding wire fails to feed, recheck
that the correct procedure for Feeding
the Welding Wire has been followed.
7) If the steps above have been followed
and fails to rectify the problem, remove
the silver coloured welding nozzle and
copper contact tip as illustrated to the
left, and check that the welding wire
is feeding without obstruction.
Re-assemble the contact tip and the
nozzle.
