WeldCorp ARC 140 AMP, Owner'S Operating Manual

Page: 5 / 18

• DON’T OVERREACH:
Keep proper footing and balance at all times.
• DRESS PROPERLY:
DO NOT wear loose clothing or jewellery. They can be caught in
moving parts. Wear protective hair covering to cover long hair, and gloves and non-slip
footwear is recommended when working outdoors.
• TAKE CARE OF CABLES:
Never carry welding equipment by the cable and never pull the
cable to disconnect it from a socket. Keep cables away from heat, oil and sharp edges.
Replace damaged cables.
• DISCONNECT TOOLS: Disconnect welding equipment when not in use, before servicing,
and when changing accessories such as blades, bits and cutters.
• AVOID UNINTENTIONAL OPERATION: Do not carry plugged in welding equipment with
a finger on the switch. Be sure that the switch is off when plugging in.
• OUTDOOR USE EXTENSION CABLES: When electric power equipment is used outdoors,
only use extension cables marked as suitable for outdoor use.
• STAY ALERT: Watch what you are doing. Use common sense. Do not operate welders
when you are tired or under the influence of alcohol or drugs.
• CHECK DAMAGED PARTS: Before using welding equipment, parts that are damaged
should be carefully checked to determine that they will operate properly and perform
their intended function. Any part that is damaged should be properly repaired
or replaced by an authorized service agent. Have defect switches replaced by an
authorised repair agent. Do not operate power equipment if it cannot be turned off and
on by the switch.
• REPAIR OF POWER EQUIPMENT BY EXPERTS:
Power equipment is built in accordance
with relevant safety authority requirements. The repair of power equipment must only
be carried out by experts; non-expert repairs may cause considerable danger for the
user and void warranty.
Page 4