Page
8
of
12
CHANGING THE POLARITY (ONLY FOR GAS-NO GAS VERSIONS)
Step 1: Open the reel compartment door.
Step 2a: MIG/MAG Welding (Gas)
Or Step 2b: Flux Welding (no gas)
Connect the torch cable from the wire to the terminal
(+)
Connect the clamp return to the terminal (-)
Connect the torch cable from the wire feeder to the
terminal (-)
Connect the clamp return cable to the terminal (+)
Step 3: Close the compartment door.
LOADING THE WIRE REEL
WARNING!
Before starting the operations to load the wire make sure the welding machine is switched off and
disconnected from the main power supply outlet.
GAS
NO GAS
A