Welch Allyn Transaction Team 1500, Startup Manual

Page: 11 / 24

3
RS-232 Cable / AC Power Installation
1. Make sure the power switch is turned off on the computer where you will be
installing the TT1500.
2. Plug the 15-pin connector (HDB15) of the serial cable into the back of the
TT1500.
3. Plug the 9-pin
1
connector (DB9) of the serial cable into an available serial
port on your computer (usually COM port 1).
4. Plug the male connector of the AC power supply into the socket on the back
of the 9-pin serial cable connector (DB9) which is plugged into the back of
your computer.
5. Plug the base of the AC power supply into a standard 120 volt, 60 Hz, AC
power outlet.
Installation is now complete. You may now turn on your computer.
1. If your computer has a 25-pin serial port, you will need to obtain a 25-pin to 9-pin adapter
from your local computer store or other source.
4. Plug AC power supply
3. Plug DB9 connector
Host
into host
into DB9
2. Plug HDB15
connector into TT1500