10
SCANTEAM 6920 User’s Guide
Setting Keystroke Speed to 25, 40, or 60 Characters per Second
Use the same procedure as setting keystroke speed to 80 c/s" to
set the characters per second to 25, 40, or 60. The keystrokes (at
step 4) are:
US2<ENTER>
for 25 C/S or
US4<ENTER>
for 40 C/S or
US6<ENTER>
for 60 C/S.
Setting Keyboard Type to XT
1.
Turn off power to the host PC.
2.
Set MSR DIP switch position 8 to OFF.
3.
Turn on power to the host PC.
4.
Type the following keys:
UKX<ENTER>
.
5.
Turn off power to the host PC.
6.
Set MSR DIP switch position 8 to ON.
7.
Set MSR DIP switch position 2 to ON.
Note: Step 8 is required for XT keyboard type command (“UKX”) only!
8.
Set MSR DIP switch position 1 to ON.
9.
Reapply power to the host PC.
Setting Keyboard Type to PS/2 models 25/30/70 or AT–PS/2
Use the same procedure (above) to change from AT-PS/2 to
PS/2 models 25/30/70 type keyboards,,or from XT to AT-PS/2.
The keystrokes (at step 4) are:
UKP<ENTER>
to change to PS/2 models 25/30/70 or
UKA<ENTER>
to change to AT-PS/2.
