Welch Allyn SCANTEAM 3000PDF, Techical Manual, Page: 53 / 92

4–21 Programming the Reader
!
!
" #
Programming Flow
1. Enter Prefix/Suffix programming.
2. Select Prefix programming.
3. Set the LRC value to the computed X’ored (Hex) value (87XX)
4. Scan the required prefix as a Hex value.
5. Select Suffix programming.
6. Scan 86 to transmit the LRC to transmit as one character.
7. Scan the required suffixes as Hex values.
8. Exit Prefix/Suffix programming mode.
Programming Steps
1. Scan the Enter label on the Prefix/Suffix menu page.
2. On Bar Code Chart I, scan Roman Numeral I.
3. On Bar Code Chart III, scan 8
7
0
E
4. On Bar Code Chart III, scan 02
5. On Bar Code Chart I, scan Roman Numeral II.
6. On Bar Code Chart III, scan 86.