4
Propaq LT Outline
SM 2840 Rev B 09/2011
ECG: Menu for Bandwidth, Filter, Pacer
NIBP: Menu for Format, Units, Smartcuf
TIMINGS: Menu for Backlight Timeout, Display Timeout, Demo
SERVICE: Menu for qualified personnel
d.
Silence Audio Alarms: Options of times to choose from to silence alarms
e.
Alarm Tone: OFF, LOW, MED, HIGH – Option to choose tone
G. ECG Lead/Vector Menu
1.
Highlight the green colored vector - there are 7 options of vectors: Lead I, II, III, AVR, AVL,
AVF, V
2.
Press the Select button to obtain a drop down menu of vectors that can be viewed (6 seconds
at a time)
3.
The Resp (24 seconds) and SPO
2
are two other waveforms that can be viewed
4.
The “Add 2
nd
Wave” Option is available for the user to view 2 waveforms at the same time on
the LCD screen
H. Battery Management
1.
Recharge a Battery
a.
Confirm that the green LED (on the right) is on at the charging station, indicating that
AC power is connected
b.
Slide the monitor all the way down into the Charging station until the monitor clicks
into place
c.
Confirm that a green LED (on the left) is on at the Charging station. This indicate the
battery is now charging
d.
When the battery is fully charged, the green LED (on the left) is off.
e.
Message: LOW BATTERY: < than 30 minutes, VERY LOW BATTERY:
< than 15 minutes
2.
Inspect and Clean the Monitor and Accessories
a.
To clean the Propaq LT, Charging station, Accessories: Wipe with equipment with a
nearly–dry cloth moistened with one of the approved cleaning solutions in the
Directions For Use manual.
b.
Do not let the cleaning solution run into connector openings, latches, and crevices.
←
Charging Light
