Welch Allyn KleenSpec 789 Series, Directions For Use Manual

Page: 15 / 220

1-11
Emissions and immunity information
Electromagnetic emissions
The Welch Allyn KleenSpec® Corded Illumination System is intended for use in
the electromagnetic environment specified below. The customer or the user of
the Welch Allyn KleenSpec® Corded Illumination System should assure that it
is used in such an environment.
Emissions test Compliance Electromagnetic environment - guidance
RF emissions
CISPR11
Group 1
The KleenSpec® Corded Illumination
System uses RF energy only for its internal
function. Therefore, its RF emissions are
very low and are not likely to cause any
interference in nearby electronic
equipment.
RF emissions
CISPR11
Class B
The KleenSpec® Corded Illumination
System is suitable for use in all
establishments, including domestic
establishments and those directly
connected to the public low voltage power
supply network that supplies buildings used
for domestic purposes.
Harmonic
emissions IEC
61000-3-2
Class A
Voltage
fluctuations/
flicker emissions
IEC 61000-3-3
Complies