Welch Allyn 4802D, Directions For Use Manual

Page: 26 / 36

AutOFF* This displays the number of seconds before the scale turns off when operating on battery power.
The
Cont
value prevents the scale from turning off automatically.
ACCont* This option causes the scale to remain on when plugged in to AC power.
rES
Pressing
REWEIGH
or
RECALL
switches between the following options:
0.001 kg
0.002 kg
0.005 kg
0.010 kg
UnitS* This option allows you to change the displayed weight unit.
Note
Do not change the scale units if you have purchased the kilogram-only option.
KILOS* This option allows the weight to display in kilograms.
POUNDS and OUNCES* This option allows the weight to display in pounds and ounces.
POUNDS* This option allows the weight to display in pounds.
OUNCES* This option allows the weight to display in ounces.
bEEPEr* This option determines the audible signal that occurs when a front panel button is pressed.
rEcALL
This option allows you to turn on the scale in Recall mode. If this option is set to OFF, the
RECALL
button does not operate.
USb* This option allows you to send weight values to a computer.
Prtunt*
This option determines whether pounds or kilograms are used in the send data function when
the scale is connected to a computer or a Welch Allyn device.
Press
REWEIGH
or
RECALL
to switch between the following options:
If the pounds and kilograms indicators are illuminated on the control panel, the data sent is
determined by whichever unit is selected on the control panel.
If the kilogram indicator is illuminated, it will only send data in kilograms, regardless of the unit
selected on the control panel.
If the pounds indicator is illuminated, it will only sed data in pounds, regardless of the unit
selected on the control panel.
PrtOPt*
Press
REWEIGH
or
RECALL
to switch between the following options:
PnlPrt
: The current weight is sent to a computer or a Welch Allyn device when
SEND
DATA
is pressed on the control panel.
AutPrt
: The current weight is automatically sent when a weight reading occurs.
SEt-UP This option is displayed when you have cycled through all the options. Press and hold the power
button to power down the scale.
Specifications
This device is powered by an external power supply. When used together, the device
and the power supply are considered ME equipment.
Item Specification
Scale 4802D
22 Appendices Welch Allyn Pediatric/Infant Scale