System settings
18
− Make sure the polarity of the batteries
(+ or –) is correct.
1. Open the battery compartment
6
by removing the
battery compartment cover
5
.
2. To replace the batteries
12
, remove the old batteries first.
Insert 4 batteries (size AA) in the battery compartment.
3. Close the battery compartment by replacing the battery
compartment cover.
Using a power supply unit
The blood pressure monitor can also be operated
with a power supply unit (not included in the
package contents). A medical power supply unit
(DC 6.0 V, 600 mA) is recommended for use. The
adapter connection pin must be positive inside and
negative outside with a 0.08" (2.1 mm) coaxial joint.
1. Connect the output plug of the power supply unit
(not provided) to the power plug jack
8
.
2. Connect the power supply unit to an outlet.
System settings
The system settings allow you to select users, and set date,
time and time format.
1. Push the SET button
4
.
A user icon ( or )
14
will show on the display
1
.
2. Push the M button
2
to select either user icon 1 or user icon 2.
This allows up to two users to save and accumulate the test
results (60 memory slots per user).
ZurFreigabe_V3
