9.3.5 Replacing the oven light halogen lamp
Live parts
Risk of electric shock posed by live parts
Touching live parts underneath the covers or underneath the control panel may result in electric
shock.
Make sure that the covers and the control panel are properly installed.
Make sure that all maintenance work under the covers, under the control panel, and on the power
cord is performed exclusively by a qualified electrician from an authorized customer service
company.
Hot surfaces
Risk of burns posed by high temperatures inside the oven cavity and on the inside of the unit door
Touching any interior oven cavity parts, the inside of the unit door, or any parts that were found inside
the oven cavity during cooking may result in burns.
Before performing any maintenance work, wait until the oven cavity has cooled down to a
temperature lower than 140 °F.
Wear the required personal protective equipment.
Sheet metal parts with sharp edges
Cut hazard posed by sheet metal parts with sharp edges
Working with or behind sheet metal parts with sharp edges poses a cut hazard for hands.
Exercise caution.
Wear the required personal protective equipment as indicated in the relevant safety instructions.
Oven light parts
The following figure shows the oven light's parts:
9 Cleaning and maintenance
Operating Manual
151
Summary of Contents for Convotherm OES 6.10 Mini
