Page of 8
6
OPERATION:
SWITCH
WARNING: Be safe! Protect your eyes and wear safety goggles at all times
while operating Benchtop Buffer.
The switch is located on the front of the base of this buffer. Move On/Off switch to the On position to
activate.
NOTE:
ALWAYS turn Benchtop Buffer OFF via the switch in the event of a disruption in the electrical
power supply. This will safeguard operator against possible injury when power is restored.
MAINTENANCE
WARNING:
Make sure this tool is disconnected from its power source before attempting
any maintenance, cleaning, or inspection.
•
Maintain your Benchtop Buffer.
It is recommended that the general condition of any Benchtop
Buffer be examined before it is used. Keep your Benchtop Buffer in good repair by adopting a
program of conscientious repair and maintenance. Have necessary repairs made by qualified
service personnel.
•
Cleaning and Lubrication.
Use only mild soap and a damp cloth to clean the tool. Never let
any liquid get inside the tool, and never immerse any part of the tool into a liquid. Self-lubricating
bearings are used in the tool and periodic lubrication is not required.
