future reference, please complete the owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual
to become familiar with this product before you begin using it.
This machine is designed for certain applications only. Northern Tool + Equipment cannot be
responsible for issues arising from modification. We strongly recommend this machine is not
modified and/or used for any application other than that for which it was designed. If you have
any questions relative to a particular application, DO NOT use the machine until you have first
contacted Northern Tool + Equipment to determine if it can or should be performed on the
product.
For technical questions please call
1-800-222-5381
.
INTENDED USE
This 20-Gallon Parts Washer is suitable for the rapid cleaning of small mechanical parts, motor
parts, etc.
TECHNICAL SPECIFICATIONS & PACKING LIST
Item Description
Maximum Pump Output
4 GPM (15L/min)
Tank Capacity
20 Gallons(76 L
）
Solvent Capacity
12 Gallons(46 L
）
GENERAL SAFETY RULES
WARNING:
Read and understand all instructions.
Failure to follow all instructions listed
below may result in electric shock, fire and/or serious injury.
WARNING:
The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur.
It must be
understood by the operator that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
WHEN INSTALLING YOUR PARTS WASHER
1. Assemble the Parts Washer according to the instructions below.
2. Place it on firm, flat and level surface in a well-ventilated area, away from any open flames.
Page of 7
2
