28
Quick Set Up Guide
Shenzhen Weistek Co., Ltd
Add.: RM2301, Shenzhen Overseas Chinese High-Tech Venture Park, Shenzhen, P. R. China
Website:
www.weistek.net
4. Preparations before printing
Notice: Please insert the SD card into your Ideawerk before printing,
otherwise the software will not be able to connect your Ideawerk. If
your Ideawerk is disconnected with your pc due to interruption,
please pull out and re-insert the USB cable.
4.1 Building plate Calibration and Z-height Measurement
Each Ideawerk is pre-calibrated, while the building plate and the
Z-height may be affected during transportation.
4.1.1 Turn on the Power Switch of your Ideawerk, and connect your pc
with your Ideawerk by the USB cable. Open DoraWare-W 1.0, click
[Flush] and select the Combo, then click [Connect] to connect your
Ideawerk.
Notice: each Ideawerk has a different Combo Number. In this case,
the Combo Number is COM15. The Combo Number can also be
traced in the Device Manager. (Pic 3.3-01)
(Pic 4.1-01)
