Weishaupt WWP-RG1 Manual Download Page 20

83316002 1/2019-08 La

WK Burners                        up to 32,000 kW

These industrial burners of modular 
construction are adaptable, robust and 
powerful.
Even on the toughest industrial applications
these oil, gas and dual fuel burners operate
reliably.

WKmono 80 Burners           up to 17,000 kW

The WKmono 80 burners are the most 
powerful monoblock burners from Weishaupt. 
They are available as oil, gas or dual fuel 
burners and are designed for tough industrial
application.

The complete program:
Reliable technology and prompt, professional service

W Burners

up to 570 kW

The compact burners, proven millions of times
over, are economical and reliable. Available as
gas, oil and dual fuel burners for domestic and
commercial applications.
The purflam

®

burner version with special 

mixing head gives almost soot-free combustion
of oil with greatly reduced NOx emissions.

monarch

®

WM Burners

and Industrial Burners        up to 11,700 kW

These legendary industrial burners are durable
and versatile.
Numerous variations of oil, gas and dual fuel
burners meet a wide range of applications and
capacity requirements.

MCR Technology / Building Automation
from Neuberger

From control panels to complete building man-
agement systems - at Weishaupt you can find
the entire spectrum of modern control 
technology. Future orientated, economical and
flexible.

Service

Weishaupt customers can be assured that 
specialist knowledge and tools are available
whenever they are needed. Our service 
engineers are fully qualified and have 
extensive product knowledge, be it for burners,
heat pumps, condensing boilers or solar 
collectors.

Max Weishaupt GmbH · 

88475 Schwendi

Weishaupt close by? Addresses, telephone numbers etc. can be found
at  www.weishaupt.de

We reserve the right to make changes. All rights reserved.

Water heaters/Energy storage

The diverse program of potable water and
energy storage for various heat sources
includes storage volumes of 70 to 3,000 litres.
In order to minimize storage losses, potable
water cylinders from 140 to 500 litres are
available with highly efficient insulation using
vacuum insulation panels.

Solar systems

The stylish flat-plate collectors are the ideal
complement for any Weishaupt heating 
system. They are suitable for solar water 
heating and for combined heating support.
With versions for on-roof, in-roof and flat roof
installations, solar energy can be utilised on
almost any roof.

Wall-hung condensing boilers
for gas                                    up to 240 kW

The wall-hung condensing boilers WTC-GW
have been developed to meet the highest
demands in ease of operation and efficiency.
Modulating operation means these units 
operate quietly and economically. 

Floor-standing condensing boilers
for oil and gas

up to 1,200 kW

The floor-standing condensing boilers 
WTC-GB (up to 300 kW) and WTC-OB 
(up to 45 kW) are efficient, low in pollutants
and versatile in use. 
Even the largest capacities can be covered by
cascading up to four gas condensing boilers.

Heat pumps                            up to 180 kW

The heat pump range offers solutions for the
utilisation of heat from the air, the soil or
ground water.
Some systems are also suitable for cooling
buildings.

Geothermal probe drilling                             

With its daughter company, BauGrund Süd,

Weishaupt also offers geothermal probe and
well drilling. With the experience of more than
10,000 systems and more than 2 million meters
of drilling, BauGrund Süd offers a 
comprehensive service program.

Summary of Contents for WWP-RG1





















Reviews: