Document P/N:
2P42520
Release Date:
07/11/2016
Revision: D
18 of 22
Assembly of Components continued
7. Attach the Torque Regulating Bar to an approved power wrench. Care must be taken that bar has the
appropriate rating for the intended application. This is clearly indicated on the large end of the extension.
8. Tighten the bolts using an alternating pattern in which the bolts are incrementally rotated to ensure each
thread engagement length is similar. Continue this until the bolts no longer rotate.
9. Verify that the torque applied to the bolts is within the allowable range for each size. This is to be
accomplished by testing the first connection (see Calibration Procedure) using a standard torque wrench. If the
Torque Regulating Bar is not available, all connections must have the torque verified.
