HYDRAU-FLO
®
Installation
ction heading
Document Number:
Revision: 0
CONTROLLED DOCUMENT
Copyright © 2015, Weir Minerals Australia Ltd. All rights reserved.
Page 4-25
Issue Date: 23 February 2015
4
Installation
Accurate information must be provided upon inquiry so the unit is supplied with correct adaptors, lines and fittings to
the customer’s specification. Please check that the supplied fittings and adaptors meet the specific requirements of the
installing unit.
4.1
Pre-Installation
The Hydrau-Flo
®
Valve components must be installed by persons who are qualified and have reviewed this Installation,
Operation and Maintenance Manual. Furthermore the installation must be undertaken in a safe working environment
that is free from hazards. The installer must be aware of any potential hazards in the working environment and must
seek to control and minimise the risk before any installation works are commenced.
The status of the fuel tanks in which the Hydrau-Flo
®
Valve components are to be installed must be checked prior to
installation. The release of fuel in the tanks or residual fuel present could result in contact with persons and could also
be a source of ignition.
CAUTION
Clean the area around the fuel receiver and adaptor on the fuel tank.
Drain the tank empty before installing.
Isolate, tag out and lock out the machine as per site requirements.
Ensure safe access to the areas to be work on as per site standards.
Site specific PPE must be worn for the areas where the work is to be
performed. Provision should be made for the catchment and disposal
of excess fuel.
Ensure the right type of receiver is selected for the application.
4.2
Installation Tool Kit
The Hydrau-Flo
®
valves are supplied with a Hydrau-Flo
®
Installation tool kit
(103628),
which contains tools for installing
all types of Hydrau-Flo
®
valves.
Table 4-1: Installation Tool Kit
200629
Tool for installing
Hydrau-Flo
®
float control valve
– Side entry
201240
Tool for installing
Hydrau-Flo
®
fuel filling valve (Blue & Black)
–
Side entry
202125
Tool for installing
Hydrau-Flo
®
fuel filling valve (Red)
101023
Tool for installing
Hydrau-Flo
®
fuel filling valve (Blue & Black)
–
Top entry