![Weiom WT-01 User Manual Download Page 8](http://html.mh-extra.com/html/weiom/wt-01/wt-01_user-manual_953256008.webp)
GMT-8:00
108
00 GMT+2:00 00200
GMT+8:00
00800
GMT-7:00
GMT-6:00
GMT-5:00
GMT-4:00
GMT-3:00
GMT-3:30
107
00
106
00
105
00
104
00
103
00
10330
GMT+3:00
GMT+3:30
GMT+4:00
GMT+4:30
GMT+5:00
GMT+5:30
00300
00330
00400
00430
00500
00530
GMT+9:00
GMT+9:30
GMT+10:00
GMT+11:00
GMT+12:00
GMT+13:00
00900
00930
01000
01100
01200
01300
Note:
Other input is regarded as the default value (00000).
GPS Reception Timer
This value controls the GPS reception. The watch will fix GPS according to this timer.
“00”: the watch is always on, to receive GPS data;
“01”-“99”: the watch will turn on to receive GPS in every 1-99 minutes.
Note:
Other input is regarded as the default value (00).
SMS/GPRS Location Report Timer
This value controls the auto location report in SMS as well as in GPRS.
“00”: there is no auto location report;
“01”-“99”: the watch will auto report according to the timer.
Note:
Other input is regarded as the default value (00).
Battery Monitor
The watch will check the battery level at a predefined interval. When the battery runs away to a low level, it
will send an alarm.
Note:
The normal battery level ranges from 3400mv to 4200mv.
Geofence
Geofence defines a circular district. This circular district forms on a radius predefined by this value. After
Geofence is set up, on breach of it, the watch will send two alerts to
TIMER
.
Note:
a).You can specify the center point by a text command (refer to
Clause 4.3
), as well as by turning on
Geofence on the watch screen.
b).The tracker will specify the first fixed location as the center point, when you turn on Geofence function
while the tracker doesn’t fix GPS.
Speeding Alarm
This value defines the speed limit. When the watch moves over the limit, it will send two alerts to
TIMER
.
It is suggested the speed limit be set no less than 50km/h. The limit below 50km/h may cause inaccurate
8