Installation and Startup Guide
This document covers the installation of mTV Series, for the detailed specifications and operation, please
refer to Brochure and EasyBuilder Pro User Manual.
Install Environment:
Electrical
Environment
The
mTV
Series has been tested to conform to European CE requirements. This
means that the circuitry is designed to resist the effects of electrical noise. This
does not guarantee noise immunity in severe cases. Proper wire routing and
grounding will insure proper operation.
Environmental
Considerations
(1) Make sure that the units are installed correctly and that the operating limits
are followed. Avoid installing units in environments where severe
mechanical vibration or shocks are present.
(2)
Do not operate the unit in areas subject to explosion hazards due to
flammable gases, vapors or dusts.
(3) Do not install the unit where acid gas, such as SO2 exists.
(4)
This device should be mounted in the vertical position and for use on the flat
surface enclosure.
(5)
Conform to UL508 (ISBN 0-7629-0404-6) machine safety for use in
Pollution Degree 2 Environment.
Unpacking the Unit
Unpack and check the delivery. If damage is found,
notify the supplier.
Installation Instructions
Rail mounting: DIN rail 35mm
Panel mounting: Use two M4 or #8 panhead screws, mounting hole size is 4.6mm
Power Connections
System Settings
Connect mTV with TV via HDMI.
mTV series
Installation Instruction
NOTE:
Place the unit on a stable surface during
installation. Dropping it or letting it fall may
cause damage.
3
5
4
NOTE:
Conne
ct positive DC line to the ‘+’ terminal and
the DC
ground to the ‘-’ terminal.
1
2
(1)
(3)
(2)
(1) Installation Instruction, A4 double sided *1
(2) Power Connector *1
(3) mTV *1
